FYSETC Prusa MK4 Dual LED Light Kit - 24V Installation for 3D Printer

About this item

• 1. Prusa Upgraded DIY Accessories: This Light bar kit is for Prusa MK4, Dual Light version, which makes your printing area no longer dark. Good modification allows better viewing of the printing work and printing progress, no need to use a torch anymore. This is the dual light model with separate Z axis tops and light frames. You can observe your carefully printed 3D works at 360° without dead ends, operation of the printer, replacement of consumables, etc.
• 2. Package Content: The light base kit contains hardware parts w/o printable parts, including 2x 24V LED strip, 2x Aluminum u-channel, 1x ON-OFF Power switch, 1x Heat shrink tubing, Wire with Fork terminals, Replacement zip tie. Just the electrics so you can print your own custom colored mounts from Official PRUSA, model file route: Prusa - 3D Models - Accessories, search: LED Light Bar Prusa MK4. If for MK3 MK3S MK3S+MK2 series, you need to print a separate holder and modify the light strip.
• 3. Energy Saving: The LED strips can be powered by the printer power supply or connect the controller board. Use standard 24V. Our printing lamp has two colors - Yellow(W-) and White(C-) as marked. If 2 light bars light only one color, the power is ONLY 2W, If meanwhile lighting 2 colors on each bar( you need to add wires and power switch), the power is about 4W. Note: Our device only support 2 light strips light one color to avoid overload, recommend the WHITE for better luminous efficiency.
• 4. Easy Installation: Use a simple soldering iron solder the wire on to the small Mechanical switch. Press the switch to turn on or turn off the LED strip, controlled individually. Whenever you need to check the printing work, just walk to the printer to turn on the lamp. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look. Mounts also include an opening to insert a power switch.
• 5. No Strobe, more comfortable for your eyes: Upgraded LED light source, stabilized constant current. Uniform of luminance, soft light, not harsh to the eyes, which creates a comfortable and even healthy spatial light sense. Low light wane, Long service life. The LED strip brightness is default to the brightest and cannot be adjusted.